Training Drilling Main Equipment Operations For drilling Crew : ( 12-14 Februari 2018, Malaysia)

TUJUAN TRAINING :

  • Mengetahui dan memahami tentang berbagai peralatan pemboran yang dioperasikan didarat maupun laut termasuk juga laut dalam.
  • Memahami prinsip-prinsip dasar dan berbagai perhitungan sederhana untuk pelaksanaan pemboran sumur-sumur minyak, gas dan reservoir panas bumi, pengembangan pelaksanaan  perhitungan ini untuk meningkatkan kinerja pemboran sumur-sumur di lapangan.
  • Melakukan diagnosis sederhana dan memahami penyelesaian dalam melakukan pemboran  suatu sumur minyak, gas atau panas bumi.
  • Membuat analisis sederhana terhadap data eksplorasi sumuran minyak, gas dan panas bumi, kemudian mampu melakukan perancangan global pemboran  kinerja dan merencanakan pengembangannya.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana untuk perencanaan lumpur pemboran, semen, hidrolika, well control.
  • Mempergunakan pengetahuan dalam perancangan pemboran tegak, untuk keperluan perancangan pemboran sumur miring, sumur horizontal baik dengan teknologi overbalance maupun underbalance.

AUDIENCE:

Operator/Senior Operator/Engineer/Non Engineer

COURSE OUT-LINE

Introduction

  • General
  • Personal at rig site
  • Miscellaneous

Rotary Drilling Rig

  • Rig Power System
  • Hoisting System
  • Derrick
  • Block and Tackle
  • Drawworks
  • Rig Selection
  • Circulation (Mud)
  • The rotary (Swivel, Kelly, Rotary Drive)
  • Drilling Cost Analysis (Drilling Costs, Drilling Time, Tripping Time,

Geomechanics

  • Geology Prediction
  • Pore pressure Prediction
  • Hydrostatic Pressure
  • Fracture Gradient Prediction
  • Interpretation of Field Data
  • Mud Weight Planning
  • Examples

Drilling Hydraulics

  • Hydrostatic Pressure Inside the Wellbore
  • Types of Fluid Flow
  • Rheological Classification of Fluids
  • Laminar Flow in Pipes and Annuli
  • Turbulent Flow in Pipes and Annuli
  • Pressure Drop Across Surface Connections
  • Pressure Drop Across Bit
  • Initiating Circulation
  • Optimization of Bit Hydraulics
  • Particle Slip Velocity
  • Surge and Swab Pressure
  • Examples

Drilling Bits

  • Drill Bit Types (Roller Cone,  BitFixed Cutter Bit, Coring  )
  • Drill Bit Classification (Roller Bit Classification, Drag Bit Classification,
  • Drill Bit Selection and Evaluation (ToothWear, BearingWear, GaugeWear)
  • Factors that Affect the Rate Of Penetration (Bit Type,  Formation Characteristics, Drilling Fluid Properties, Operating Conditions, BitWear, Bit Hydraulics, Examples)

Drillstring Design

  • Drill Pipe Classification
  • Calculation of Neutral Point
  • Drillstring Design Calculations ( Tension, Collapse,  Biaxial Loading, Shock Loading, Torsion)
  • Drillpipe Bending resulting from Tonging Operations
  • Selecting Drill Collar Weights
  • Stretch of Drillpipe
  • Critical Rotary Speeds
  • BottomHole Assembly Design
  • Placement of Stabilizers and Reamers (Building Assemblies,  Holding Assemblies, Dropping Assemblies, WOB Increase,
  • Dogleg Severity Analysis
  • Examples

Drilling Fluid

  • Functions of Drilling Mud
  • Types of Drilling Mud (Water-base Muds, Oil-base Muds, Mud Calculations, Recommended Mud Flow Properties,  Examples)

Casing Design 207

  • Casing Types
  • Conductor Casing (Surface Casing, Intermediate Casing, Production Casing, Liners)
  • Casing Setting Depths
  • Casing Connections
  • API Casing Performance Properties
  • General Casing Design Criteria
  • Graphical Method for Casing Design
  • Maximum Load Casing Design for Intermediate Casing
  • Casing Centralizer Spacings
  • Stretch in Casing
  • Examples

Directional Drilling and Deviation Control 251

  • Mayor Types ofWellbore Trajectories
  • Trajectory Calculation
  • Calculating the Survey of a Well (Average angle method, Radius of curvaturemethod, Minimum Curvature Method)
  • Dogleg Severity Calculations
  • Deflection Tools and Techniques (Natural Formation Effects, Hydraulic Method (Jetting), Mechanical Methods)
  • 9.6 While Drilling Techniques (Measurement While Drilling, Logging While Drilling, Data Transfer)
  • Examples

Borehole Problems

  • Differential Pipe Sticking
  • Free Point Calculation
  • Freeing Differentially Stuck Pipe (Spotting Organic Fluids, Hydrostatic Pressure Reduction, Backoff Operations,
  • Lost Circulation Control
  • Keyseats
  • Examples

Kick Control and Blowout Prevention

  • Blowout Preventer (Rampreventers, Annular preventers)
  • Well Control Operations
  • Length and Density of Kick
  • Kick Tolerance and KillMudWeight
  • Pump Pressure Schedules for Well Control Operations
  • Kick Removal – TwoMethods (Wait-and-weightmethod, Driller’s method)
  • Equations Required to PerformDynamic or Polymer Kill
  • Examples

Cementing

  • Functions of Cement
  • Properties of Cement Slurry (Physical Properties)
  • Cement Additives (Extenders, Accelerators, Retarders, WeightingMaterial, Fluid Loss Material, Dispersants)
  • Primary Cementing
  • Liner Cementing
  • Squeeze Cementing
  • Plugback Cementing
  • Examples

TRAINER

CITRA INTI TRAINING consultant team

DURATION OF TRAINING

3days (effective21thhours )

INVESTMENT TRAINING (Excluding Accommodation) :

  • IDR 11.000.000,-/participant (Jakarta)
  • IDR 11.000.000-/participant (Bandung)
  • IDR 12.000.000,-/participant (Yogyakarta)
  • IDR 14.000.000,-/participant (Bali)
  • IDR 14.750.000,-/participant (Lombok)
  • US$ 4780/participant (Malaysia)

TRAINING FACILITIES

Certificate, Module, Training Kit, Lunch, Coffee Break, held in hotel

INFORMATIONAND PROMO

021-22830080

021-4603050

CONTACT PERSON

081213153848

SMS Center (24 jam)

081212220471

TRAINING METHOD

Interactive Methods, Presentations, Discussions

JADWAL TRAINING TAHUN 2018 :

  • 9-11 Januari 2018, Bali
  • 12-14 Februari 2018, Malaysia
  • 13-15 Maret 2018, Lombok
  • 10-12 April 2018, Jakarta
  • 14-16 Mei 2018, Yogyakarta
  • 6-8 Juni 2018, Jakarta
  • 11-13 Juli 2018, Bandung
  • 13-15 Agustus 2018, Bali
  • 17-19 September 2018, Malaysia
  • 10-12 Oktober 2018, Lombok
  • 13-15 November 2018, Jakarta
  • 10-12 Desember 2018, Lombok